27
3
Design and function
When doing this, hold the strut together with the head plate/spring plate down in a central position
on the Universal Clamping Disc 4903-2.
Move the Grippers form A
3
against the head plate/spring plate. Align the grippers
3
in such a way
that neither the head plate nor the spring plate can twist or slip out and secure it.
Determine
?
mm
If the diameter of the head plate or the spring
plate is smaller than the clamping range of Gripper
form A, please use Gripper form B.
Gripper form A
?
140-294 mm
Gripper form B
?
70-150 mm
r
e
4
To change the grippers, loosen screw
4
, remove the
Grippers form A and replace them with the Grippers
form B. Move the Grippers form B
3
against the
head plate. Adjust the required distance
w
of the
side lays
e
with screw
r
to secure the spring strut.
w
Summary of Contents for 4903/2
