Haulotte Group HTL 3210, Operator'S Manual

Page: 95 / 248

95
2420344510 E 11.11 AUS
Telescopic handlers
E
- Attachments
5.5.5 - Operation instructions
The bucket is recommended for picking up loose loads such as sand of gravel and for
excavation operations. It can be used on all types of low abrasion ground and is perfectly
suited to construction and excavation work.
The teeth are U profile (Universal). They are designed for loose, non-compact, slightly
abrasive ground (top soil, sand, gravel) or with pre-split stones and for general applications.
The flush tooth holder is mainly designed for picking up loose material requiring "standard"
digging force and for cleaning work (Leaving the ground surface flat).
5.5.6 - Precautions to avoid damaging the equipment
• Loading the bucket must be performed smoothly and with the boom completely retracted. Loading the
bucket with the boom extended may damage the boom or the telescope cylinder.
• Distribute the material evenly in the dump. The bucket capacity charts only apply to evenly distributed
loads.
Any other use is forbidden.
It is strictly forbidden to use the equipment for :
• Stump extraction
• Rock excavation
• Putting in fence posts
It is strictly forbidden to use the attachment on very hard ground.
Specific instructions concerning use of the equipment can be written and given to the driver by the
company director.
Never walk under the bucket when the lifting arm is in the raised position.
Do not use the bucket as a lift platform (Transporting personnel is strictly forbidden).
It is forbidden to use the attachment on concrete slabs.
Do not load the bucket on one side only.
Do not use the bucket as a lever. Excessive leverage could damage the buckets and the handler.
Do not use the bucket to pull a load. This could cause serious damage to the mechanical attachment
locking system and the telescope cylinder.