212
2420344510 E
11.11
AUS
Telescopic handlers
H
- Lubrication and maintenance
HTL3510
14.4.2 - Checking the oil level of the rear axle
Capacity :
• Differential : 10 l(2,64 gal US).
• Before performing the oil replacement operations, firstly remove the drain plugs ( 2 ) to eliminate any
pressure from inside the housing.
• Loosen the control plug ( 1 ).
• The lubricant level in the axle must be at the level of the control plug ( 1 ), otherwise top up to the
correct level via the same hole.
• Refit the control plugs ( 1 ) and the drain plugs ( 2 ).
Section H 20.3 -Refer to the Lubricants and equivalents table for the type of oil used.
• Take advantage of this operation to clean the control plugs ( 1 ) and the drain plugs ( 2 ).
HTL4010 - 3210
Summary of Contents for HTL 3210
