Haulotte Group HTL 3210 Operator'S Manual Download Page 64

Page: 64 / 248

2420344510

E 11.11

AUS

Telescopic handlers

- Pre-operation and controls

3.5.11 - Rear-view mirrors and windows

Cab door window :

Rear window

Rear-view mirror adjustment

Adjust the rear-view mirrors as required for optimal visibility before and during use.

The window must be locked in open or closed position
during use.

Open the cab door window and lock it with the locking
mechanism.

Press the unlocking button in the cab to unlock the
window.

Pull the lever and push to open the rear window.

Ensure that rear-view mirrors are clean and clear at all times.

Summary of Contents for HTL 3210

























































































































































































































































Search results

Summary of Contents for HTL 3210

Reviews:

Related manuals for HTL 3210

Brands by name

Popular brands

Haulotte Group HTL 3210, Operator'S Manual

Search results

Summary of Contents for HTL 3210

Reviews:

Related manuals for HTL 3210

Brands by name

Popular brands