Haulotte Group HTL 3210, Operator'S Manual

Page: 200 / 248

200 2420344510 E 11.11 AUS
Telescopic handlers
H
- Lubrication and maintenance
9.2 - LUBRICATION POINT : FLY JIB 2,5 M(8 FT2 IN), 1,2 T (2646 LB) WITH
HYDRAULIC WINCH (OPTION) - FLY JIB 4 M(13 FT1 IN), 0,6 T (1323 LB) WITH
HYDRAULIC WINCH (OPTION)
Before carrying out any operations on the fly jib, it is essential to :
• Disengage all the drives.
• Operate the controls until the pressure has dissipated.
• Set the fly jib on the ground
• Stop the engine (if necessary let the engine cool down).
• Disconnect the hydraulic hoses.
In order for the fly jib to operate correctly, grease the following zones every 24 h of operation.
Lubricate generously until a ring of grease appears at the ends of each hinge.
Never carry out lubrication, maintenance and adjustment operations while the machine is switched on.
Escaping liquid can be under enough pressure to penetrate under the skin, causing serious injury. To
avoid any risk of accident, eliminate the pressure before disconnecting the hydraulic hoses. Before
repressurising the system, ensure that all the connections are correctly tightened.
Hydraulic liquid can get very hot when operating, do not carry out any operations which may cause a burn.
Wear gloves and goggles to protect yourself from fluid splashes.
Keep away from moving parts.
Marking Description
1 Contact zone
2 The pulley greaser
3 Raceway