Hasselblad H6D User Manual Download Page 48

Page: 48 / 192

TO INSERT A MEMORY CARD

Insert CFast card

Open the CFast card cover (1) on the sensor unit by inserting
a thumb in the recess and then sliding the slot cover backwards.

Behind the cover, you will see a cover for the CFast card (2) and
a cover for the smaller SD card (3).

Hold the CFast card so that the connector holes face into the
slot and you can read the brand label when you are behind the
camera.

Gently press the CFast card into the slot. If you encounter
resistance, it might be because you are holding the card
backwards or upside down.

If the card can be easily inserted nearly all the way into the
back, then you are inserting it correctly. Press the card another
couple of millimetres firmly into place.

Close the slot cover and slide it to the right to lock it.

Insert SD card

When the card slot cover door is opened, mount the SD card in
the SD card slot (3).

Close the slot cover and slide it forward to lock it.

H6D

www.hasselblad.com

USER GUIDE

Overview

Summary of Contents for H6D

































































































































































































Search results

Summary of Contents for H6D

Reviews:

Related manuals for H6D

Brands by name

Popular brands

Hasselblad H6D, User Manual

Search results

Summary of Contents for H6D

Reviews:

Related manuals for H6D

Brands by name

Popular brands