Hasselblad H6D User Manual Download Page 47

Page: 47 / 192

3.28 MEMORY CARDS

There are two types of memory cards that can be used with the
H6D camera.

1 CFast card.
2 SD card.

When using a CFast card or SD card, the H6D is completely
self contained. No additional wires or connectors need to be
attached.

The recommended type is UDMA/type 4 /60MBs (400x) or
better. Please see the Appendix in this manual for a list of
recommended cards.

The H6D is shipped with an 16 GB SDXC SD card, which is
capable of holding approximately 75 − 150 captures (according
to model).

Note!

All cards should be formatted in the camera before first use!

Memory Card Status Display

CFast card

C = Inserted, non active.

C< = Inserted, active.

C[0] = Full.

C! = Card Error.

No Symbol = No Card inserted.

SD card

S = Inserted, non active.

S< = Inserted, active.

S[0] = Full.

S! = Card Error.

Lock Symbol = Card Write Protected.

No Symbol = No Card inserted.

H6D

www.hasselblad.com

USER GUIDE

Overview

Summary of Contents for H6D

































































































































































































Search results

Summary of Contents for H6D

Reviews:

Related manuals for H6D

Brands by name

Popular brands

Hasselblad H6D, User Manual

Search results

Summary of Contents for H6D

Reviews:

Related manuals for H6D

Brands by name

Popular brands