Hasselblad H6D, User Manual

Page: 43 / 192

3.22 REMOVE AND ATTACH THE VIEWFINDER
To remove, hold the viewfinder in the right hand and while
pressing the viewfinder release button (1), lift the rear of the
viewfinder up and away from the camera body (2).
To attach, hold the viewfinder at a slight angle and rest it
on the top of the camera. Slide the viewfinder forward until
the front locating pin is in position in the recess in the front
edge of the viewfinder screen aperture on camera body.
Press the rear part of the viewfinder firmly downwards until
it clicks into place.
Ensure that both sides of the viewfinder are seated correctly
and that it has been firmly attached and locked into position.
Failure to do so could cause an intermittent malfunction
if the data bus interface connections between the viewfinder
and camera body are not positively secured.
Note!
Do not lift or hold the camera by the viewfinder alone.
1
2
H6D www.hasselblad.com
USER GUIDE
Overview
43