Hasselblad H6D, User Manual

Page: 152 / 192

H6D www.hasselblad.com
USER GUIDE
To Use
152
CHANGE FOCUSING SCREEN
The H6D is fitted with a Spherical Acute-Matte D Focusing
Screen for extreme brightness, clarity and even illumination.
An optional accessory screen with a grid pattern is also
available.
To change the Focusing Screen, remove the viewfinder to access
the Focusing Screen.
To remove the screen, place the tip of a ballpoint pen or similar
in the Focusing Screen removal lug and pull upwards. To replace
the Screen, position the right side of the Screen in place so that
it sits correctly in the recess. Place the tip of a ballpoint pen
or similar in the Focusing Screen replacement indentation and
press downwards until the Screen snaps into position. Try to
avoid touching either surface of the Screen with bare fingers.
Note!
Do not attempt to clean the Focusing Screen by immersing it in
water, or use any kind of cleaning fluid. If the Screen becomes
damp, do not use hot air to dry it. Use a soft cloth on the upper
surface only. Seek advice from an Authorized Hasselblad Service
Center if the Screen becomes particularly soiled. Remember
that particles or greasy marks on the Screen might impair the
viewfinder image but have no effect on the recorded image.
Focusing Screens showing the difference in masking and
composition frame marking. Type varies according to sensor
size. See under Accessories for other types (with grid pattern,
for example).