Haskel Q-Drive QGD Series, Installation, Operation And Maintenance Manual

Page: 22 / 66

Q-Drive Installation, Operation, and Maintenance Manual
16 of 59
Using Q-Drive System
WARNING: Anyone in the vicinity of the system must wear the personal protection
equipment (PPE): safety glasses, steel-toe shoes, protective/safety gloves, hard hat,
and any equipment that is a site requirement.
CAUTION: Do not start any testing, maintenance, or service procedures while the
system has positive power. Isolate the inlet gas source, outlet gas, and vent to
atmospheric pressure before starting any procedure.
Before You Begin
Before you turn on the power for the system, check the lubrication level. The motor housing has 2
sight glasses through which you can view the oil level. When the system is not running, check the oil
level in both glasses. If the oil level is not sufficient, add more oil. See “Adding New Oil.”
Sight glass for oil level in motor housing
Powering On the System
1. Connect high voltage supply. Turn on the power switch to power the system.
Front View of Q-Drive
Power
Switch
High
Voltage
Input
User
Interfac
e