
Page
8
of
34
Harvest
I
by Meridian
H10XX
Assembly
Manual
Step 11
(Infeed Housing Assembly)
Loosen bolts and remove both access panels. Using a lifting strap, lift and slide the infeed housing over the
bottom flighting on the 1
st
tube. Secure the infeed housing to the first tube using (6) 1/2" x 1-1/2” flange bolts
and nuts & (2) 1/2" x 1/1-2” hex bolts & flange nuts. The (2) 1/2" x 1-1/2” hex bolts shoule be used on the
bottom holes and orientated as shown in fig. 11.4.
Fig. 11.1
Fig. 11.2
Fig. 11.3
Fig. 11.4