Page
15
of
34
Harvest
by Meridian
H10XX
Assembly
Manual
Step 23
Next the hopper lift cable will be assembled. Insert cable through the upper then the lower pulley on the hopper
transport arm. Pull cable back to the winch. Insert cable through hole on the side of the winch drum. Fasten to
winch using the winch cable clamp & nut profided with winch.
Step 24
(Truss Cable Assembly)
First assemble all the eyebolts to the lower cable mount brackets. Assemble the eyebolts to the transport arm
bracket & the connecting flanges of the 1
st
& 2
nd
tube. Attaching the eyebolts will include (4) 1/2" eyebolts,
1/2" external tooth lock washers & 1/2" hex nuts. Thread nut onto eyebolt so 1/2" is sticking out past the nut.
If assembling an H1082 there will be 6 of each fastener used.
Fig. 23.1
Fig. 23.1
Fig. 24.1
Fig. 24.2