Page
16
of
34
Harvest
by Meridian
H10XX
Assembly
Manual
Step 25
Take 1 short 29 foot cable & attach it to the eyebolt located in the middle of the first tube. Secure using (2) 3/8”
cable clamps as shown if fig. 25.1. Pull cable to first truss and through the cable clamp located on the truss.
When the cable is through the cable clamp, continue pulling the cable to the quicklink located on the joint
between the 2
nd
& 3
rd
tube. Secure using (2) 3/8” cable clamps as shown if figure 25.2. Repeat on opposite side
of the auger. Always have saddles of the cable clamps on the “live” end of the cable.
If
assembling an H1082
skip Step 26 and go to Step 27.
Fig. 25.1
Fig. 25.2
Fig. 25.3