9
Connecting the Reel
1. Position the reel skid assembly next to the cart assembly. Lower the lift arm partially with the hydraulics
and position the reel so it is aligned, *side with valves goes towards the cart (below left).
Reel & Cart assemblies w/ lift arm being lowered
Reel & Cart assembly aligned
2. Align the holes in the lift arms with the mounting holes in the reel frame (above right).
3. Install the Pins & bushings (found in the cart parts box) as shown below. The bushings are located
between the inside of the reel frame brackets and the lift arm on the front and back side of the lift arm. After
the pins and bushings have been installed, install the roll pins in each end of the pivot pins. Lift the now
connected reel assembly slowly to remove the reel shipping skid, then raise into full transport position so
the lift arm is resting against the stops.
Summary of Contents for 720 Dew Simulator
Page 2: ...2 intentionally blank...
Page 7: ...7 Safety Decal Locations...
Page 69: ...69 Notes...
Page 70: ...70 Notes...