16
Trip Sections
The trip sections shown (left) will determine when each cross
tube section will spray as the reel assembly rotates.
Adjusting Trip Sections
Adjust trip sections that are active based on windrow size/shape/and condition.
•
If the windrow is tall and fluffy, adjust the sections so the tines turn on as soon as they enter the
windrow.
•
If the windrow is shorter, shut off the leading trip sections so the tines do not turn on until they are about
to enter the hay.
•
If less water is required to be added to the windrow, turn off rear trip sections so the tines don’t spray
the entir
e time they’re in the windrow.
•
If there is moisture in the bottom of the windrow but the top 2/3 of the windrow is dry, turn off trip
sections at the bottom of the arc so the tines turn on as they enter the windrow, turn off for the bottom
1/3, then turn back on until they exit the windrow.
To activate, loosen the adjustment bolt on the backside of the valve plate
with a 3/8” wrench. Rotate the reel so
the trip section is contacting a valve roller, slide the assembly up in the slot until the roller is pressed down,
then retighten the bolt. To deactivate sections, loosen the bolt, slide down in the slot away from the valves,
then tighten in position.
Trip active
Trip inactive
Summary of Contents for 720 Dew Simulator
Page 2: ...2 intentionally blank...
Page 7: ...7 Safety Decal Locations...
Page 69: ...69 Notes...
Page 70: ...70 Notes...