12
Hooking up Tractor, Dew Sim, and Trailer Tank
1. Connect the tractor to the cart assembly with a 1
” draw pin (below, right).
2. Adjust the front hitch position to level the cart assembly to the tractor drawbar. The hitch can be moved up
or down as needed.
3.
Connect the water trailer to the rear of the cart assembly with a 1” draw pin (shown above, left).
4. Adjust the rear hitch position to level the water trailer with the cart assembly by flipping the receiver hitch.
5.
Connect the 2” valve/coupler from the water trailer to the coupler at the rear of the Dew Simulator.
6. Connect the
¾” green stripe valve assembly female coupler to the aluminum male coupler at the rear of the
Dew Simulator.
7. Connect the trailer lighting connector to the rear of the Dew Simulator. See trailer wiring schematic for
additional information.
2” Valve Coupler
Trailer Light
Connection
3/4
” Aluminum Coupler
Summary of Contents for 720 Dew Simulator
Page 2: ...2 intentionally blank...
Page 7: ...7 Safety Decal Locations...
Page 69: ...69 Notes...
Page 70: ...70 Notes...