![background image](http://html1.mh-extra.com/html/harvest-tec/720-dew-simulator/720-dew-simulator_owners-manual_2103728010.webp)
10
Connecting Hoses
Lower the reel from the transport position to the field operating position so both reel tires are on the ground.
Connect the stainless steel
3/4” water line attached to the swivel on the reel to the 45-degree elbow in the KZ
valve on the lift arm.
Connection location on the reel assembly
Above view of the water line reel connection
Connecting the Perimeter Nozzle Hoses
1. Locate the perimeter nozzle hoses coiled on the lift arm and remove the black zip ties holding them in
place.
2. Locate the black 1/2
” hose that has the blue zip tie on the end. Attach this hose to the INSIDE nozzle
assembly and secure with the attached hose clamp. Hose may be trimmed to length but leave enough
slack to allow for movement of the reel frame when lifting into the transport position.
3. Locate the black 1/2
” hose that has the red zip tie on the end. Attach this hose to the OUTSIDE nozzle
assembly by following the routing of the other 1/2
” hose, then routing it through the rear of the inside
assembly and across the front of the reel frame to the outside nozzle assembly. Use the two P-clips
installed on the front of the frame to secure the hose. Trim hose to proper length and secure to outside
nozzle assembly with the attached hose clamp.
Summary of Contents for 720 Dew Simulator
Page 2: ...2 intentionally blank...
Page 7: ...7 Safety Decal Locations...
Page 69: ...69 Notes...
Page 70: ...70 Notes...