![background image](http://html1.mh-extra.com/html/harvest-tec/720-dew-simulator/720-dew-simulator_owners-manual_2103728024.webp)
24
Field Setup Screen Steps
1. Input the estimated Tons/Acre expected to be produced in
the field by pressing Ton/Acre. When selecting any of the
input tabs the screen shown on right will appear to input
your information. Pressing Enter will save the information.
2. Input the starting moisture content in the field by selecting
Start MC%.
3. Input the number of Trips Active. Refer to Adjusting Trip
Sections if unsure on how to activate Trips
4. Input the Target MPH, which needs to be the same as the baler
5. Input the target moisture content by pressing Target MC%.
6. Input the number of tips installed by pressing Tips Installed.
7. Input the width of the windrow by pressing Swath FT.
8. Input the target temperature by pressing Target Temp.
9. Input the tip size being used by pressing Tip Size.
10. After the information has been updated press the Main Menu button to move to the main screen.
Min & Max Levels
Target GPM and Gal/T
will be automatically populated after the field details have been inputted.
Set Pressure
information will be populated after the field details have been inputted. Use this information to
adjust the pressure valve on the Dew Simulator.
-The number of hours on each heater will be shown on the bottom of the screen.
Min GPM MW5 Tips 2.1
Min GPM MW11 Tips 4.5
Minimum PSI Set 300
Max GPM MW5 Tips 12.0
Max GPM MW11 Tips 20.0
Maximum PSI Set 1200
Summary of Contents for 720 Dew Simulator
Page 2: ...2 intentionally blank...
Page 7: ...7 Safety Decal Locations...
Page 69: ...69 Notes...
Page 70: ...70 Notes...