![background image](http://html1.mh-extra.com/html/harvest-tec/547c/547c_installation-manual_2103716026.webp)
26
8. Installation of Control
Use the supplied suction cup mount to position the monitor in the cab. Make sure the glass is clean before
installing the suction cup mount. If a non-cabbed tractor is used, use the supplied #10 screws for installation
on the fender. If unit is mounted on fender it will need to be removed at night and stored in a clean, dry area.
Use the Ram mount swivel-positioning nut to tighten the entire assembly. Adjust it so that you can view the
entire screen and be able to use the touch screen without interfering with other tractor functions.
Connect communication wire (006-5650T) to the bottom of the terminal.
Summary of Contents for 547C
