![background image](http://html1.mh-extra.com/html/harvest-tec/547c/547c_installation-manual_2103716023.webp)
23
6. Installation of Plumbing
A. Intake
Use the 003-
EL3412 on the bottom of the tank to route 1/2” line (002-9001) to the 003-A1212 fitting on
the ball valve already attached to the pump plate. Attach hose clamps (003-9003) on both of the
fittings.
B. Discharge
The three
– 1/4" hose assembly will be used to attach the pumps to the spray blocks. The pump order
starts with the pump closest to the filter bowl numbering 1,2, and 3 Pump one will attach using the
clear hose, pump two will use the green striped hose and pump three will use the blue striped hose.
Attach each hose to the check valve of the same color coming from the spray blocks.
C. High and Low Output Tips
Your baler comes with two sets of tips: a low set and a high set.
-The low set will cover outputs of 32 to 440 lbs/hr. Install the following tips for low output:
Clear hose to silver tips
Green striped hose to pink tips
Blue striped hose to brown tip.
-The high set will cover outputs of 84 to 632 lbs/hr. Install the following tips for high output:
Clear hose to pink tips.
Green striped hose to brown tips.
Blue striped hose to yellow tips.
**Refer to Tip Output under APPLICATION RATE of the control unit to calibrate system.
Summary of Contents for 547C
