4
Introduction
Thank you for purchasing this 547C Hay Preservative Applicator System for your Round Baler. Please read
this manual carefully to ensure correct steps are followed when attaching the applicator to the baler. This
applicator is designed to apply Harvest Tec buffered propionic acid. The model 547C base kit includes the
following parts: Tank, Frame, Pumps, Hose, Baler Mounted Processor, Touchscreen Display, Moisture
Sensors, and Miscellaneous Hardware. The applicator can be installed on the Round Balers with the proper
installation kit. Before installing the unit on the baler, make sure you have the proper installation kit. (See the
chart below.) If you are unsure about your installation kit please contact your local authorized dealer for
specifications. For your convenience we have included a parts break down for the model 547C Hay
Preservative Applicator System.
Left and Right sides are determined by facing in the direction of forward travel.
Tools Needed
Standard wrench set
Side cutter
Standard screw
driver or 5/16” nut driver
Hose cutter
SAE sock set
Hammer
Drill bit set
Crescent wrench
Center punch
Level
Summary of Contents for 547C
