21
4. Installation of the Spray Nozzles
a.
Locate nozzle block hanger assemblies with tips pre-installed.
b.
The assembly with the check valves will be mounted to the left hitch support plate when
standing next to the PTO just in front and under the large round cross support tube. Use
½” x 1 ¼” Bolt, flat washer, lock washer, and nut to secure to baler. Repeat for the other
assembly on the other side.
c.
Loosen Philip screw on nozzle block and turn them slightly in toward each other.
d.
Measure distance between hose barb fittings and cut one each of the three colors of hose
to that length. Attach them to the nozzle assemblies with the same color and secure them
with hose clamps.
Summary of Contents for 547C
