![background image](http://html1.mh-extra.com/html/harvest-tec/547c/547c_installation-manual_2103716011.webp)
11
2. Mounting Front Pump Plate Support
a. Open right side door of baler.
b. Locate mounting holes for your size baler in bracket (001-4703XE). Mount bracket to pre-
stamped square holes on diagonal support structure of baler. Note pictures on following pages will
help in locating the pre-stamped holes on your baler. Secure with two M8 x 25mm carriage bolts
and flanged nuts.
c. Disconnect pump mounting bracket (001-
4646C) from pump plate by removing four 3/8” x 3/8”
flange bolts. Attach right top corner of pump mounting bracket to bracket (001-4703XE) with two
3/8” x 1” hex bolts, flat washers, lock washers, and nuts. Note: top of both brackets should be
flush.
001-4646C Pump
Mounting Plate Holes
4x6 and 5x6
Baler
Mounting Holes
4x5 and 5x5
Baler
Mounting Holes
001-4703XE
Figure 1
Summary of Contents for 547C
