Propeller Owner’s Manual
147
MAINTENANCE PRACTICES
61-00-47
Page 6-12
Rev. 16 May/20
(9) If a lubrication fitting
(p/n A-279 or C-6349) was removed
at the beginning of this procedure, it may be reinstalled
or replaced with a lubrication hole plug (p/n 106545).
(a) Reinstall the lubrication fitting or hole plug that was
removed at the beginning of this procedure.
(b) Tighten until
finger-tight, then tighten one additional
360 degree turn.
(10) Make sure that the ball of each lubrication fitting is
correctly seated.
(11) Reinstall a lubrication fitting cap on each lubrication
fitting.
C. Approved Lubricants
(1) For a list of lubricants approved for use in Hartzell
propellers, refer to the Consumable Materials chapter of
Hartzell Propeller Inc. Standard Practices Manual 202A
(61-02-02).
