Propeller Owner’s Manual
147
INSTALLATION AND REMOVAL
61-00-47
Page 3-34
Rev. 17 Sep/20
E. Installing the HC-E(4,5)N-5KL Propeller on the Aircraft
Engine
WARNING:
MAKE SURE THE SLING IS RATED UP TO
800 LBS (363 KG) TO SUPPORT THE
WEIGHT OF THE PROPELLER ASSEMBLY
DURING INSTALLATION.
CAUTION 1: WHEN INSTALLING THE PROPELLER
ON THE AIRCRAFT, DO NOT DAMAGE
THE ICE PROTECTION SYSTEM
COMPONENTS, IF APPLICABLE.
CAUTION 2:
INSTRUCTIONS AND PROCEDURES
IN THIS SECTION MAY INVOLVE
PROPELLER CRITICAL PARTS. REFER
TO THE INTRODUCTION CHAPTER
OF THIS MANUAL FOR INFORMATION
ABOUT PROPELLER CRITICAL PARTS.
REFER TO THE ILLUSTRATED PARTS
LIST CHAPTER OF THE APPLICABLE
OVERHAUL MANUAL(S) FOR THE
IDENTIFICATION OF SPECIFIC
PROPELLER CRITICAL PARTS.
(1) With a suitable crane hoist and sling, carefully move the
propeller assembly to the aircraft engine mounting flange.
WARNING:
SOLVENTS ARE FLAMMABLE AND
TOXIC TO THE SKIN, EYES, AND
RESPIRATORY TRACT. SKIN AND EYE
PROTECTION ARE REQUIRED. AVOID
PROLONGED CONTACT AND BREATHING
OF VAPORS. USE SOLVENT RESISTANT
GLOVES TO MINIMIZE SKIN CONTACT
AND WEAR SAFETY GLASSES FOR
EYE PROTECTION. USE IN A WELL
VENTILATED AREA AWAY FROM SPARKS
AND FLAME. READ AND OBSERVE ALL
WARNING LABELS.
(2) Using Quick Dry Stoddard Solvent or MEK, clean the
engine flange and the propeller flange
.
(3) Remove the pitch change rod cap, if applicable.
