Propeller Owner’s Manual
147
INSPECTION AND CHECK
61-00-47
Page 5-4
Rev. 17 Sep/20
(4) If an ice protection system is installed, visually examine
the anti-icing or de-ice boot for damage.
(a) Refer to the Anti-ice and De-ice Systems chapter
in this manual for operational checks and
troubleshooting information for Hartzell Propeller Inc.
ice protection systems.
(5) Composite Blades Only:
(a) Composite blades that do not have an anti-icing or
de-ice boot installed may require erosion tape on the
leading edge of the blade.
1 Refer to the section, “Erosion Tape Installation”
in the Maintenance Practices chapter of this
manual for requirements and instructions.
C. Spinner Assembly and Blade Retention Components
(1) Inspect the spinner and the visible blade retention
components for damage and/or cracks.
(a) Repair or replace components as required before
further flight.
D. Hardware
(1) Check for loose or missing hardware.
(a) Retighten or reinstall as necessary.
