Hartmann DC3-18, Instructions For Use Manual

Page: 29 / 152

29
English
EN
The saved values can also be deleted when ‘ ’ or ‘ ’ is shown on the display,
as described above. Again, all data for the selected user memory will be deleted.
Deleting individual values
If you would like to delete individual values, call up the relevant value and press
the corresponding memory key ( or ) for 4 seconds to make the display flash.
After pressing the key for another 4 seconds, the individual value is deleted.
If you release the memory key prematurely, no data will be deleted.
When you delete an individual value, the next oldest measured value
moves to the memory position of the deleted measured value. Deleting
a measured value also recalculates the average values concerned.
7. Transferring measured values to Veroval
®
medi.connect
■ ■
You can transfer your data to your PC quickly and easily via the USB cable
supplied with the device, using the Veroval
®
medi.connect software. You can
select different time periods to look at (day, week, month) and automatically
receive perfectly prepared graphs of your values. The software also supports in
comparing the data from various devices. With just a few clicks, all of the results
can be printed out for or sent to the doctor via e-mail.
■ ■
Download the Veroval
®
medi.connect software from the website
www.veroval.info. Any PC with a Windows 7, 8 or 10 operating system is
suitable, provided it has official Microsoft support.
■ ■
Make sure that the blood pressure measuring device is only connected to PCs
that comply with the relevant international safety standards (e.g. IEC 60950-1).
■ ■
First, start Veroval
®
medi.connect on your PC. Go to „Settings“ and select
Veroval
®
duo control as the desired blood pressure monitor. This step only
needs to be completed once.
IFU_Veroval_dc_SK6_0307662_2020-02-10.indd 29 27.02.20 13:09