51
ON/1/
:
The headlight and the rear light are switched on.
OFF/0:
The headlight and the rear light are switched off.
Auto:
see “S (Sensor)”.
N (Night):
The headlight is switched on. In models with a day riding
light function, the day riding light also provides illumination
with a dimmed brightness level.
S (Sensor):
The headlight is automatically switched on and off using a
sensor. Headlights with a day riding light will automatically
switch between day riding lights and night riding lights.
T (Day riding light):
The headlight is equipped with additional LEDs for riding in
daylight. These increase your visibility to other road users.
In the switch position “T”, the day riding light is constantly
switched on.
Stationary light
If you ride with the light switched on for at least 3 minutes,
capacitors in both the headlight and the rear light will be
charged up. If you stop once the capacitors are charged up,
the stationary light will remain illuminated until the charge has
been used up.
Detachable lights
NOTICE:
This chapter is valid for models “Spezial 1.5/1.9”.
Removal and fitting
Rear light
• To fit the light, push the rear light into the bracket in such
a way that the tab enters the bracket (see
Figure B-9
, left).
• Hold the bracket steady and pull the rear light as far down
as you can until you hear and feel it click in.
Tab
Figure B-9: Fitting (left) and removal (right) of the rear light.
• To remove the light tilt the rear light slightly forwards on its
underside and pull it out from above (see
Figure B-9
, right).
Operation »
Lights
» Operation » Lights » Models with hub dynamo / Detachable lights
