manualshive.com logo in svg

HARTJE CITY BIKE, User Manual

Share
Download
HARTJE CITY BIKE User Manual Download Page 30

30

Notes 

»

Brake types

Hydraulic lines

Rim

Brake shoe

Figure H-7: Front view of a hydraulic rim brake.

Disc brake (hydraulic)

WARNING

Risk of accident and injury!

Bent or leaking lines and open connections on hydraulic 
brakes can cause the brakes to fail.
• If you identify damage or leaks on the hydraulic lines, 

consult your specialist dealer immediately.

CAUTION

Risk of injury!

Brake discs can get very hot. Your skin can be burnt if it 
comes into contact with the brake disc.
• Do not touch the brake discs directly after coming to 

a stop. Wait until the brake discs have cooled off.

NOTICE

Risk of damage!

If the brake pads vitrify due to being subjected to 
strain for too long, the braking effect will be reduced, 
e.g. if you continuously brake on long descents.
• If it is not dangerous to do so, brake intermittently but 

with greater force on long descents.

» Notes » Brake types » Rim brake / Disc brake (hydraulic)

Summary of Contents for CITY BIKE

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands