manualshive.com logo in svg

HARTJE CITY BIKE, User Manual

Share
Download
HARTJE CITY BIKE User Manual Download Page 36

36

Notes 

»

Suspension

WARNING

Risk of accident and injury!

Depending on the condition of the road, an incorrectly 
adjusted suspension can lead to a loss of traction with 
the ground.
• Ask your specialist dealer to adjust the suspension 

fork and the suspension seat post.

• Request an explanation of the operation and method of 

adjustment of the suspension fork and the suspension 
seat post from your specialist dealer.

NOTICE

Risk of damage!

If the suspension is incorrectly adjusted it can compress 
too far and cause impact noises. This can damage the 
suspension.
• If you feel hard shocks or can hear noises when 

the suspension compresses, have your suspension 
checked by your specialist dealer.

Suspension seat post

Depending on your bicycle model, the seat post may be 

a suspension seat post.
•  Verify whether your bicycle is equipped with a suspension 

seat post (see 

Figure H-14

 and chapter “Bicycle passport”).

Joint

Figure H-14: Standard seat post (left) and suspension seat post 

(right). The suspension seat post can be recognised at the joint.

» Notes » Suspension » Suspension seat post

Summary of Contents for CITY BIKE

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands