HARTJE CITY BIKE User Manual Download Page 47

Page: 47 / 96

Models with one hand brake

Front brake

Figure B-2: Model with one hand brake.

• To brake with the front wheel brake, pull the right brake

lever (see

Figure B-2

Models with two hand brakes

Front brake

Rear brake

Figure B-3: Model with two hand brakes.

• To brake with the front wheel brake, pull the left brake

lever (see

Figure B-3

• To brake with the rear wheel brake, pull the right brake

lever.

Coaster brake

Figure B-4: Operation of the coaster brake (as an example).

• To brake, push the pedal drive backwards (see

Figure B-4

NOTICE:

If you can turn the pedal drive freely backwards,

your bicycle is not equipped with a coaster brake.

• Regulate the braking force using the force you apply when

pedalling against the resistance.

• Pedal forwards to release the brake.

Operation

Brake

» Operation » Brake » Hand brake / Coaster brake

Summary of Contents for CITY BIKE

































































































Search results

Summary of Contents for CITY BIKE

Reviews:

Brands by name

Popular brands

HARTJE CITY BIKE, User Manual

Search results

Summary of Contents for CITY BIKE

Reviews:

Brands by name

Popular brands