HRR 4104 Return Path Receiver Product Manual Rev A (3/05)
2–1
2
Installing the HRR 4104 Receiver
This chapter provides information on installing the HRR 4104 Return Path
Receiver. Please read all the instructions before beginning installation.
This chapter describes:
•
How to receive and inspect the HRR 4104
•
Tools and accessories
•
How to install the HRR 4104 module into an HLP 4200 Platform
•
How to configure two HRR 4104 modules as a redundant pair
•
How to connect the RF output cables
•
How to install and use the HFM 4000 Fiber Management Tray (optional)
•
How to connect the input fiber cables
•
How to test RF signal output
2.1
Receiving and Inspecting
As you unpack your unit, inspect the shipping container and equipment
for damage. Save the shipping material for future use. If the container or
the equipment is damaged, notify both the freight carrier and Harmonic.
See Appendix B,
, for contact information.
CAUTION:
To protect yourself from potential injury and to protect the
equipment from further damage, do not perform any
operational tests if the equipment appears to be damaged.
2.2
Tools and Accessories
The following accessories are provided with each HRR 4104:
•
Antistatic bag
The following accessories are provided with each HMC 4008:
•
6-pin muting cable assembly (part no. 229-0020316)—for primary/backup
connection
Summary of Contents for HRR 4104
