Harmonic HRR 4104, Product Manual

Page: 23 / 42

NETWatch Site Controller
HRR 4104 Return Path Receiver Product Manual Rev A (3/05) 3–7
3.1.4.1 Module Alarms Menu
The Module Alarms menu displays the active alarms in any of the individual
receivers or the module as a whole. The Module Alarms menu is shown in
Figure 3-4. Further information about the alarms is provided in Section
3.4 HRR 4104 Alarms on page 3-8.
3.1.4.2 Module Status Menu
The Module Status menu lets you obtain the serial number and firmware
version of the HRR 4104, or the optical power and wavelength at which each
of the four receivers is operating. The Module Status menu is shown in
Figure 3-4.
3.1.4.3 Module Adjust Menu
The Module Adjust menu allows you to copy the settings from Receiver A to
Receivers B, C, and D. The Module Adjust menu is shown in Figure 3-4.
3.2 NETWatch Site Controller
Harmonic’s NET 5200 NETWatch Site Controller provides a complete
element management system, including a Windows™-based GUI and
communications package for monitoring and controlling a network of
multiple HRR 4104 receiver modules either remotely or locally. For
information on installing and using this system, consult the
NET 5200
NETWatch Site Controller Product Manual.
3.3 HRR 4104 Front Panel LED Indicators
The HRR 4104 front panel includes two LEDs, as shown in Figure 1-2 on
page 1-2.
The Status LED illuminates red if an alarm condition exists within the
receiver. It also lights for a short period during power up. The Status LED
illuminates green if no alarm condition exists and the receiver is operating
normally.
The Select LED illuminates yellow when the HRR 4104 receiver module is
selected via the front panel controls of the HLP 4200.