HIGHLANDER II VERTICAL PLATFORM LIFTS:
Install Manual
17FEB2021 | 630-00113 REV C
5
INTRODUCTION
HIGHLANDER II: SECTION 2
SECTION 2
INTRODUCTION
DEVICE NAME: HARMAR
HIGHLANDER II -
VERTICAL PLATFORM LIFT
Indications of Use: The Harmar Highlander II Vertical
Platform Lift is designed to assist the transfer of
patients or mobility impaired persons and their
mobility device, up and down levels of a commercial
facility or residence.
READ AND UNDERSTAND
This manual provides instructions for the proper
installation and service of the Harmar Highlander
II Vertical Platform Lift which is critical to the lift’s
safety, performance and durability. Please refer
to the Owner’s Manual for operating instructions.
Any alterations to the equipment without written
authorization by the manufacturer is prohibited and
will void the warranty.
TECHNICAL
SPECIFICATIONS
Visit harmar.com for specifications on the particular
lift model and configuration.
CODE STATEMENT
The Harmar Highlander II lift has been designed to
meet ASME A18.1 “Safety Standard for Platform
Lifts and Stairway Chairlifts” under section 2 or
section 5 and has been certified to CAN/CSA-B44.1/
ASME A17.5 “Elevator and Escalator Electrical
Equipment”.
Code requirements for Vertical Platform lifts may
vary depending on location. It is the installers
responsibility to contact their state, city or local
code enforcement office and determine all the
regulations the lift and installation are subject
to. You must do this before installing the Vertical
Platform Lift.
APPLICABLE STANDARDS
BASED ON INSTALLATION
TYPE
Commercial and residential installations require
compliance to the ASME A18.1 safety code and
other codes that may be adopted by state, city and
local code authority having jurisdiction.
To meet the full intent of ASME A18.1 regulation the
installer is required to contact their state, city or
local code authority having jurisdiction for permits,
adopted rules and inspections of the vertical
platform lift.
