Harman AMX N2600S Series, Instruction Manual

Page: 80 / 121

Decoder Configuration Options
N2612S/N2622S Manual
80
IPv4 Section – MWC IP Setup
The IPv4 section of the MWC IP Setup on the Network page is shown in Figure 72 . Options are described in Table 31 .
FIG. 72
IPv4 Section
TABLE 47
Network Page: IPv4 Section of MWC IP Setup
Option Description Notes
DHCP / Static IP
Address
Used to select either DHCP or Static IP Address mode.
IP Address
View the current IP address of the encoder. When in Static mode,
enter an IP address into this field.
Subnet Mask
View the current subnet mask address of the encoder. When in
Static mode, enter a subnet mask address into this field.
Gateway
View the current gateway address of the encoder. When in Static
mode, enter a gateway address into this field.
Save
Pressed to save all information on the MWC IP Setup page and
apply those settings.
Cancel
Pressed to discard all settings made on the MWC IP setup page.