Harman AMX N2600S Series, Instruction Manual

Page: 77 / 121

Decoder Configuration Options
N2612S/N2622S Manual
77
General Setup Section
The
General Setup
section of the
Home
page is shown in Figure 69 . Options are described in Table 45 .
FIG. 69
General Setup Section
TABLE 45
Home Page: General Setup Section
Option Description Notes
IGMP Join on stream
loss
When enabled will send IGMP Join messages when no
incoming stream is detected.
IGMP Join Interval Determines how often (in seconds) the unit transmits
IGMP Join messages.
Enable Send Status
Enables the encoder to send a periodic status packet to
the
Send Status Address
listed.
Send Status Address
When Enable Send Status is enabled, the encoder
sends a periodic status packet to the IP address
specified here.
Status Interval (sec)
Determines how often (in seconds) the unit transmits
status packets.
Gratuitous ARP
Enables the encoder to send a periodic address
resolution protocol (ARP) packet to the network.
Arp Interval (sec)
Determines how often (in seconds) the unit transmits
gratuitous ARP packets.
Discovery Packet
Transmit
Enables the N-Series multicast discovery service (used
to identify units)
For N-Series devices to communicate with each other,
their multicast settings must be compatible.
Discovery Interval (sec) Determines how often (in seconds) the unit transmits
discovery packets.