Harman AMX N2600S Series, Instruction Manual

Page: 29 / 121

Encoder Configuration Options
N2612S/N2622S Manual
29
General Setup Section
The
General Setup
section of the
Home
page is shown in Figure 22 . Options are described in Table 4 .
FIG. 22
General Setup Section
TABLE 4 Home Page: General Setup Section
Option Description Notes
Enable Send Status
Enables the encoder to send a periodic status packet to
the
Send Status Address
listed.
Send Status Address
When Enable Send Status is enabled, the encoder
sends a periodic status packet to the IP address
specified here.
Status Interval (sec) Determines how often (in seconds) the unit transmits
status packets.
Gratuitous ARP
Enables the encoder to send a periodic address
resolution protocol (ARP) packet to the network.
Arp Interval (sec)
Determines how often (in seconds) the unit transmits
gratuitous ARP packets.
Discovery Packet
Transmit
Enables the N-Series multicast discovery service (used
to identify units)
For N-Series devices to communicate with each other,
their multicast settings must be compatible.
Discovery Interval (sec) Determines how often (in seconds) the unit transmits
discovery packets.
DSCP #
Select the Differentiated Services Code Point (DSCP) for
the transmitting vlan traffic.