Decoder Configuration Options
N2612S/N2622S Manual
111
Status – Status
The
Status
section of the
Status
on the
System
page is shown in
FIG. 106
Status
Section
TABLE 74
System
Page: Status Section of Status
Option
Description
Notes
HDMI Out Status
HDMI Out Resolution
Select the output resolution of the video stream to be transmitted
to the output device (e.g. LCD).
The Scaler Enabled setting must also be
enabled for output resolution to work.
Downscaling is supported only if the input
stream is 3840x2160 and the scaler is set to
1080P. Any other attempts at downscaling are
not recommended/supported.
HDCP Status
Reports status of HDCP along with version information
Port 50001 Source IP
IP address of the device connected to the port
Port 50002 Source IP
Serial Source IP
KVM IP
USB 2.0 IP
Port P0
Displays the ethernet ports as either connected or disconnected.
Port P1
Network Video Stream
Displays the status of the streams on the network.
Active
: Stream is detected
Inactive
: Stream is not detected
Network Audio Stream
Audio Activity
