Introducing Your New N2600 Series Devices
N2612S/N2612S Manual
8
Introducing Your New N2600 Series Devices
Product Overview
The N2600 AV over IP Series belongs to the N-Series product family from AMX and consists of N2612S Encoders, N2622S
Decoders, N2615 Wallplate Encoders and N2625 Wallplate Decoders. This series provides a flexible, feature-rich, and simple-to-
deploy digital media distribution and switching solution that can be used in 4K applications with resolutions up to 4096x2160,
with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency over
standard gigabit Ethernet networks.
Any source can be sent to one or more displays by routing through layer-2/layer-3 switches using standard Cat5e cable. Standard
features include H264 Stream, output scaling, bi-directional serial, IR, embedded 7.1 audio, USB 2.0 and KVM-over-IP extension.
Card versions compatible with the N-Series N9206 card cage are available for high-density applications.
Features include:
Design flexibility allows you to start as small as 1x1 and grow the system in increments of single sources and devices by
simply adding additional Encoders and Decoders.
Simultaneously stream an H264 or H265 Stream from the N2612S Encoder allowing for maximum flexibility of the
system.
USB 2.0 can be independently routable or follow video.
Output scaling performed at the Decoder for maximum flexibility.
Power over Ethernet (PoE) eliminates the need for a local power supply and speeds installation. Units can still be powered
locally by 12VDC. This allows easy rack-mountable, high-density installations.
Infrared (IR) emitter connection allows control of low-cost, IR-only display devices.
Fast install with Phoenix connectors for power, IR, RS232 serial, and analog audio interfaces.
Pass-through HDMI interface allows easy installation with local display, such as desktop PC applications.
USB-A and USB-C connections for KVM applications.
Hardware Overview
Refer to the following figures (front and rear panel drawings of these devices) and the
Front and Rear Panel Descriptions table
page 8 for hardware details.
1)
USB Micro-B Port
2)
Device Reset Button
3)
IR Emitter Input Connection
4)
Device ID Discovery Button
5)
Power/Status Indicators
FIG. 1
N2612S Encoder Front Panel
1)
12VDC Input (not needed with PoE)
2)
Status Indicators
3)
RJ45 Auto-Sensing Gigabit Ethernet Switch Port — PoE
4)
RJ45 Auto-Sensing Gigabit Ethernet Switch Port
5)
IR Emitter Output Connection
FIG. 2
N2612 Encoder Rear Panel
6)
RS232 Connection
7)
Analog Audio Input
8)
Passthru HDMI Video Out
9)
HDMI 1 Video Input
10)
HDMI 2 Video Input
1
2
3
4 5
10
9
8
7
6
5
4
3
2
1
