Harman AMX N2600S Series, Instruction Manual

Page: 54 / 121

Encoder Configuration Options
N2612S/N2622S Manual
54
Web Page Section – General Setup
The
Web Page
section of the
General
on the
Security
page is shown in Figure 35 . Options are described in Table 15 .
FIG. 47
Web Page Section
TABLE 26 Security
Page: Web Page Section of General
Option Description Notes
Force HTTPS
When enabled will force the web page access to always be HTTPS
Web Page Disable Wen enabled will cause the web pages to fail to load
To enable or disable via API call will need to
use secure socket connections.
Command Secure
Ports Only
If enabled, commands must be sent using secure sockets
(TLS/SSL) and follow the secure command port protocol.
Change Command
Password
Set the default password for command encryption. When issuing API commands, this password
must precede each command in the format:
<password>\r<command> .
Change Stream
Encryption
Password
Set the default password for stream encryption. To successfully communicate, the Decoder
and Encoder passwords must match.
Reset
Click Reset to return to default password and settings.
Save
Pressed to save all information on the Security Setup page and
apply those settings.