Harman AMX N2600S Series, Instruction Manual

Page: 52 / 121

Encoder Configuration Options
N2612S/N2622S Manual
52
EDID Section – EDID Setup
The
EDID
section of the
EDID
on the
Video/Audio
page is shown in Figure 33 . Options are described in Table 14 .
FIG. 45
EDID Section
TABLE 25
Network Page: Audio Section of Audio Setup
Option Description Notes
EDID (drop down) Select what EDID information to display.
HDMI 1: Displays EDID information connected to the Encoder’s
HDMI 1 input.
HDMI 2 : Displays EDID information connected to the encoder’s
HDMI 2 input.
Pass-thru : Displays EDID information connected to the encoder’s
HDMI Pass-thru.
Decode Click to translate the EDID currently displayed on the left to the
operating parameters list on the right.
Encode
After making any changes to the operating parameters list on the
right, click this button to update the EDID information on the left.
To store the new settings, click Set EDID .
Read EDID Click to initially show the EDID or if the source EDID has changed
(refreshes the EDID table).
Set EDID
If creating a custom EDID, click to apply the changes.
Reset EDID
For Digital , choose a standard EDID from the drop-down menu
and click
Reset EDID
to apply.
Ensure that the source is disconnected when
setting an EDID.