25
SETUP MENU
To change the Sample Frequency setting, first
select the desired digital audio output type as
indicated above. Then, press the
Enter Button
`
. Press the
⁄
/
¤
Navigation Buttons
e
so that that circle next to your desired
choice is orange.
If your A/V receiver or surround processor is
NOT capable of handling 96kHz signals, select
the 48kHz option. When this choice is made,
the DVD 50 will automatically convert any
96kHz signals to a 48kHz output so that your
system is capable of decoding them.
If your A/V receiver or surround processor IS
capable of handling 96kHz signals, select the
96kHz option. When this choice is made, the
DVD 50 will pass each type of signal through
without any further processing. When a 96kHz
signal is present, it will be noted by the
96kHz/24-Bit Audio Indicator
T
.
Once the selection is made, press the
Enter
Button
`
to return to the Main Settings
Menu.
At this point you will have completed all of the
steps needed to configure the DVD 50 for the
specifics of your system. Before playing a disc
you may use the
⁄
/
¤
Navigation Buttons
e
to return to any of the items for additional
changes, or you may press the
Play Button
g
/
#
to begin or resume playback of a
program.
Setup Menu
