Hardy Process Solutions HI 6600-EIP, User Manual

Page: 48 / 137

HI 6600 Series Modular Sensor System User Guide
Page | 48
Chapter 5
Instrument Operation
• • • • • •
Operations
The following parameters are used for instrument operations:

Tare Operations
o Tare Amount
o
Tare Offset
o
Tare

Zero Operations
o
Zero Tolerance
o Zero Amount
o Zero

Auto Mode
o
Auto Mode Enabled
o
Auto Mode Disabled

Count Operations
o Count Enable
o
Unit Weight
o
Sample Size
o
Weigh Sample
Tare Parameters and Commands
Tare Amount
The Tare Amount parameter displays the total amount that has been "Tared" from the scale minus the Tare Offset.
This value is reset to zero when net and gross are the same weight, and totalizes the differences each time the Tare
command is run. This value excludes the initial Tare Offset value, which is a constant value subtracted from the Net
weight value without the operator running the Tare command
From the Web page or Using the Front Panel Display: Enter the Tare Amount in the text box provided or use the arrow
keys to enter the Tare amount.