Hardy Process Solutions HI 6600-EIP, User Manual

Page: 11 / 137

HI 6600 Series Modular Sensor System User Guide
Page | 11
Chapter 2
Specifications and Features
• • • • • •
Chapter 2 provides specifications for HI 6600 series instruments. The specifications listed are designed to
assist in the installation, operation and troubleshooting of your instrument. All service personnel should be
familiar with this section before installing or repairing the instrument.
Basic Specifications
HI 6610 Weight Processing Module (WPM)
Number of Channels
Each Weight Processing Module is a single channel of weight. HI 6600 Modular Sensor System can support
up to 28 channels. The actual number of channels that can be transmitted by a single I/O table request depends
on the PLC interface format.

EtherNet/IP: Up to 28 Channels per request

Profibus-DP Up to 10 Channels per request

Modbus-TCP: Up to 14 Channels per request

Modbus-RTU: Up to 14 Channels per request
Note: See section below on Power Requirements for Configuring your Modular Sensor System Over Distance for
specific recommendations on number of channels and maximum system distances.
Update Rate per Weight Processing Module (WPM)

110 times per second per channel (processed weight, display, communications)
Weight Processing Module (WPM) Resolution

Displayed - 1:10,000

Internal - 1: 8,388,608
WAVERSAVER
®

User Selectable
OFF, 7.50 Hz, 3.50 Hz, 1.00 Hz (default), 0.50 Hz, 0.25 Hz
Averages

1 to 250

User-selectable in Single Increments