Hardy Process Solutions HI 6600-EIP, User Manual

Page: 8 / 137

HI 6600 Series Modular Sensor System User Guide
Page | 8
Chapter 1
HI 6600 Series Overview
• • • • • •
This Manual describes installation, setup and operating procedures for the HI 6600 Series Modular Sensor
System. Be sure to read and understand all cautions, warnings, and safety procedures in this manual to ensure
safe installation and operation of the instrument.
Hardy Process Solutions sincerely appreciates your business. We encourage input about the performance and
operation of our products from our customers. Should you not understand any information in this manual or
experience any problems with this product, please contact our Technical Support Department at:
Phone:
(858) 278-2900
Toll Free:
1-800-821-5831
FAX:
(858) 278-6700
E-Mail:
hardysupport@hardysolutions.com or hardyinfo@hardysolutions.com
Website:
www.hardysolutions.com
Please visit our website for the latest revision of the HI 6600 Series User Guide and sign up for the Hardy
Newsletter to get the latest information on all Hardy products and services. For answers to technical issues
and service problems, please visit the Hardy WebTech section of our website or contact a technician by
phone during our normal operating hours (6:30 AM to 5:30 PM Pacific Time).
Introduction to the HI 6600 Modular Sensor System
The HI 6600 Modular Sensor System consists of at least one HI 6600 Hardy Gateway Module (HGM) and up
to 28 HI 6610 Weight Processor Modules (WPM). See specific system recommendations in Chapter 2 on
configuring a Modular Sensor System.
The system communicates with PLCs, PACs and DSCs over EtherNet/IP, Modbus-RTU, Profibus-DP and
other popular communication protocols via a single communication link.