Hardy Process Solutions HI 6600-EIP, User Manual

Page: 18 / 137

HI 6600 Series Modular Sensor System User Guide
Page | 18
Chapter 3
HI 6600 Hardware Installation
• • • • • •
Chapter 3 covers physical installation of HI 6600 Modular Sensor System. User and service personnel should
read this chapter before installing or operating the HI 6600 Modular Sensor System.
Safety
Before you begin installing your HI 6600 series equipment, please review the important safety
precautions below.
Do not operate or work on this equipment unless you have read and understand the instructions and warnings
in this Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Hardy
Process Solutions provides manuals in PDF format that are easily downloaded from our website, free of
charge. Look under the Docs & Programs tab on the web page for each product.
General Precautions

Always disconnect the power cord before disassembling.

Always replace broken or damaged modules or hardware immediately.

Always check to be sure that no loose parts are sitting on printed circuit boards or electrical
connectors or wires when disassembling or reassembling.

Always protect printed circuit boards from electrostatic discharge (ESD). Always use approved ESD
wrist straps and anti-static pads.
Unpacking
1) Before signing the packing slip, inspect the packaging for damage, and report damage of any kind to the
carrier company.
AVERTISSEMENT – Risque d’explosion – Ne pas débrancher l’équipement à
moins que l’alimentation soit coupée ou que la zone ne présente pas de risques
WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT
UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE
NON-HAZARDOUS
AVERTISSEMENT – Risque d’explosion – La substitution de composants peut
diminuer la conformité pour la Division 2
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY
IMPAIR SUITABILITY FOR DIVISION 2.