HARDT
Responsive, Reliable Solutions
19 of 32
C
U
S
-0
1
3
-0
0
0
1
-0
9
5. Operation
A)
5.3.2
Unloading the Skewers
USE PROTECTIVE CLOTHING WHEN LOADING AND UNLOADING THE ROTISSERIE.
Follow these steps to properly unload skewers out of the rotisserie. (For simplicity, “left” and “right” refers
to loading skewers into a front load model).
1. Open the door to stop the drive from rotating.
2. Referring to diagram ‘A’ below, remove each skewer by lifting the left end, sliding the skewer through
the plate hole, and then, as show in diagram ‘B’ below, gently pivot the skewer out of the rotisserie.
3. Place each skewer on a skewer cart or a cooked food table.
4. Use the green manual advance switch (see Figure 4-4 on page 10) to position skewers (or baskets)
as required for removal.
5. Close the door of the rotisserie to resume operation or cooking.
6. If no further cooking is required, press the main ON/OFF switch to end the cook cycle. Refer to Figure
4-4 on page 10 to identify the controls.
Lift and slide skewer
through the hole.
B)
Figure 5-11: Unloading Skewers
Gently pivot right side
out of drive plate.
