Hardi HC 8500, Operator'S Manual, Page: 141 / 184

5 - Operation
5.7
Press the “Select Event” button to start a spray job.
1.
Management Selection:
Press to create a new Growing
Season, Grower, Farm and Field. Or select
existing ones in the pull down menus.
˜
ATTENTION! The “Enable Management”
button is checked by default and requires a
Grower, Farm and Field to be entered before
proceeding.
Un-checking this button will allow the
operator to continue to next screen without
entering additional information on this
screen.
˜
ATTENTION! Grower, Farm and Field can also
be created in
(Management
Setup).
Press to proceed to the next step.
2.
“Hardi, Sprayer Interface (0)” should be
selected “Active”.
Product Selection:
A planting or application configuration must
include a product.
A.
Select product from the drop-down
menu.
Press to create a Application
Product or Mix/Blend.
B.
Press to continue.
Select Event
Select Operator Guidance
Product Selection
Water Active
Hardi, Sprayer Interface (0)