Hardi HC 8500, Operator'S Manual, Page: 128 / 184

4 - System setup
4.102
Rate Control: Container Level
Container Level screen - (Partially Full)
˜
ATTENTION! The container level is
transferred from the HARDI® Virtual
Terminal screen automatically.
When filling or emptying main tank, use the
following three Tank buttons to update the
amount of product in the main tank.
˜
ATTENTION! When having an electric Tank
Level, these buttons will not be selectable.
Tank Fill
The Tank Fill button increases the main tank level logged in the display to the user-defined maximum
volume (specified in the Container Setup Wizard).
Tank Empty
The Tank Empty button decreases the main tank level logged in the display to zero.
Tank Partial Fill
The Tank Partial Fill button increases the main tank level logged in the display to specific amount that you
specify by pressing
. Pressing the Partial Fill button summons the Adjust Container Amount screen.
Adjust Container Amount
•
Add
Adds product to the main tank. Press
to enter the amount.
•
Remove
Removes product from the main tank. Press
to enter the amount.
•
Set
Sets the product level in the main tank. This
button summons the , where you
can set a certain amount. Choose an amount
that is below your maximum main tank level.
Rate Control Settings
Adjust Container Amount
Add
Remove
Set
Add product to the container
Remove product from the container
Set the product from the container