29
GB 11 02 03
Sprayer setup
Transmission shaft support
The transmission shaft rests on the bracket
A
when not
in use (Low hitch models).
At High hitch models the transmission shaft is placed in
the hook underneath the drawbar when not in use
Disconnecting the spr
Disconnecting the spr
Disconnecting the spr
Disconnecting the spr
Disconnecting the spraaaaayyyyyer
er
er
er
er
Always clean the sprayer - inside and outside - before
disconnecting and parking it.
Support leg
Before disconnecting from the tractor, make sure the
support leg is properly fitted and secured by linch pin.
The support leg is stored in the bracket on the right side
of the trailer when the sprayer is attached to the tractor.
To remove the support leg: Lift the leg, remove the linch
pin and pull out the support leg.
WARNING!
To prevent the sprayer from tipping
over, do not disconnect the sprayer from the
tractor with the booms unfolded unless the boom
is supported!
Always engage the parking brake (if fitted).
If no parking brake is
fitted, or if local regula-
tions requires so, place
stop wedges in front of
and behind the wheels.
Remember to disconnect all hoses and cables from the
tractor.
WARNING!
If the sprayer is parked unattended
avoid unauthorised persons, children and ani-
mals from having access to the sprayer.
T251-0012x
A
T142-0029x
T021-0004
